AR42.10-W-1010A | Remove/install brake drum | 11.9.06 |
MODEL 374, 375.3, 930, 932, 933, 934, 940, 942, 943, 944, 949, 950, 952, 953, 954, 958.2 /4
mit Trommelbremse (S-Nockenausführung)
W42.10-0051-12
1 Brake cam
2 Brake shoe
3 Brake drum
4 Bolt
| Remove/install | ||
1 | Remove wheel | ||
2 | Release parking brake | ||
3 | Turn brake shaft on brake adjuster back to neutral position | This enables the run-in brake drum to be removed. | |
Installation: Adjust clearance. | |||
4 | Mark installation position of brake drum (3) and wheel hub relative to each other | ||
5 | Press off brake drum (3) with three bolts (4) | Tighten bolts (4) in diagonally opposite sequence. | |
Installation: Note marking on brake drums (3) relative to wheel hub. | |||
6 | Clean brake drum (3) and brake shoes (2) | ||
| Guidelines for cleaning brake linings | ||
7 | Check brake drum (3) and brake shoes (2) for signs of wear | ||
8 | Check cleanliness of wheel hub contact surfaces and the brake drum (3), clean if necessary | ||
9 | Install in the reverse order |