Remove/install brake value sensor

AR42.10-W-0340A

7.3.07

MODEL 930, 932, 933, 934

W42.10-1131-09

Shown with "VOSS 230" compressed air connection system

1 Electrical connector

2 Electrical connector

3 Compressed air connector

7 Noise insulation

8 Nuts

13.07 Brake value sensor

4 Compressed air connector

5 Compressed air connector

6 Compressed air connector

Modification notes

6.3.07	Detach noise damper (7) from brake value sensor (13.07), added.	Step 4
	Adjust brake pedal, added.	Step 7	AR29.10-W-0080B

 	Remove/install
1	Switch off ignition
2	Discharge compressed-air system
3	Open maintenance flap
4	Detach noise damper (7) from brake value sensor (13.07)
5	Identify electrical connectors (1, 2) as per the marking on the brake value sensor (13.07) and detach	 Installation: Observe identification of connectors (1, 2).
6	Identify compressed air connectors (3, 4, 5, 6) as per the marking on the brake value sensor (13.07) and detach	 Installation: Observe identification of compressed air lines (3, 4, 5, 6).
		With compressed air connection system "VOSS 230".	AR42.10-W-0900A
		With compressed air connection system "VOSS 232" (NG 8, 12) or "SCHÄFER SDF" (NG 6).	AR42.10-W-0900C
	Notes on compressed air connection systems		AH00.18-N-0001-01A
7	Remove footwell cover on driver side	 Installation: Before installing the footwell cover on the driver-side: 	AR68.30-W-1310C
		Adjust brake pedal.	AR29.10-W-0080B
8	Remove brake value sensor (13.07) and take out toward front	 Installation: Use new nuts (8).
			*BA42.60-N-1001-03A
9	Install in the reverse order
10	Fill compressed air system and check compressed air lines (3, 4, 5, 6) for leaks	 To do this, depress the brake pedal and spray the compressed air connections with a commercially available leak detecting spray or soapy water.
11	Perform a function test

 Service brake valve / brake value sensor

Number	Designation		Model 930, 932, 933, 934


BA42.60-N-1001-03A	Nut, service brake valve/brake value sensor to pedal bracket	Nm	22