P42.10-2423-06
31 Brake caliper
31g Brake pads
S10/4 Right rear brake pad contact sensor
Modification notes
| Remove/install | ||
Danger! | Risk of injury caused by body parts being jammed or crushed. Risk of injury to skin and eyes caused by brake fluid spraying out at high pressure when working on the SBC brake system | Deactivate SBC brake system using STAR DIAGNOSIS. | |
| Notes on self-locking nuts and bolts | ||
| Notes on repairs to brake system | ||
1 | Deactivate SBC brake system using STAR DIAGNOSIS. | Vehicles with Sensotronic Brake Control (SBC) | |
The following steps should be run through in STAR DIAGNOSIS: Select menu item "SBC Sensotronic Brake Control"/"Deactivate 'SBC' system". Then process all the individual steps from top to bottom. | |||
2 | Remove brake hose | ||
3 | Detach connector of brake pad contact sensor (S10/4) from brake caliper (31) | | |
4 | Remove brake pads (31g) | Model 219.322/ 354/ 356/ 357/ 372/ 375 | |
Model 219.376/ 377 | |||
5 | Remove bolts of brake caliper (31) on wheel carrier and remove brake caliper (31) | Self-locking bolt, floating caliper to wheel carrier | |
Self-locking bolt, fixed caliper to wheel carrier | |||
6 | Install in the reverse order | ||
7.1 | Bleed brake system with STAR DIAGNOSIS | Vehicles with Sensotronic Brake Control (SBC) | |
When performing the bleeding operation always observe the instructions in the document "Bleeding brake system using STAR DIAGNOSIS". | |||
The following steps should be run through in STAR DIAGNOSIS: Select menu item "Initial startup after repair"/"Exchanging brake calipers". Then process all the individual steps from top to bottom. | |||
7.2 | Bleed brake system | Vehicles with Adaptive Brake (ABR) |
Rear axle brake caliper