P42.10-2533-07
1 Cap
2 Brake fluid expansion reservoir
02 Venting hose
01 Brake fluid changing equipment
| Remove/install | ||
Danger! | Risk of poisoning caused by swallowing brake fluid. Risk of injury caused by brake fluid coming into contact with skin and eyes. | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
Danger! | Risk of injury to skin and eyes caused by handling hot or glowing objects. | Wear safety gloves, protective clothing and safety glasses, if necessary. | |
| Clean | ||
1 | Clean area around cap (1) | ||
2 | Unscrew cap (1). | ||
| Notes on repairs to brake system | ||
| Brake fluid notes | ||
3 | Add new brake fluid up to the "MAX." mark in the expansion reservoir (2) | ||
4 | Connect brake fluid changing unit (01) on expansion reservoir (2) and switch on | Pay attention to manufacturer's operating instructions. | |
5 | Remove the front wheels | If necessary | |
Remove/install wheels | |||
6 | Carrying out bleeding operation | ||
Front axle | |||
Rear axle | |||
7 | Install in the reverse order | ||
| Checking | ||
8 | Check brake system for leaks | ||
9 | Correct fluid level in expansion reservoir (2) | ||
Brake system - inspect fluid level |
Front axle brake caliper
Number | Designation | Model | Model | ||
BA42.10-P-1001-10M | Bleed screw to brake caliper | Nm | 14 | 16 | |
Front axle brake caliper
Number | Designation | Model | Model | ||
BA42.10-P-1001-10M | Bleed screw to brake caliper | Nm | 14 | 16 | |
Rear axle brake caliper