P42.10-2756-08
01 | Filling and bleeding device | 1 | Cap | 2 | Brake fluid expansion reservoir |
| Remove | ||
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Caution | Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
Topical note | Notes on repairs to brake system | ||
Topical note | Brake fluid notes | ||
1 | Open engine hood | ||
| Clean | ||
2 | Clean area around cap (1) of brake fluid expansion reservoir (2) | ||
Preparation for bleeding procedure | |||
3 | Unscrew cap (1) of brake fluid expansion reservoir (2) | ||
4 | Fill with new brake fluid up to the "MAX" mark in the brake fluid expansion reservoir (2) | Brake fluid | |
5 | Connect filler/bleeder unit (01) to brake fluid expansion reservoir (2) and switch on | ||
| 000 588 01 82 00 Filling unit | ||
Pay attention to manufacturer's operating instructions. | |||
| Remove | ||
6 | Remove front wheel-and-tire assemblies | ||
| |||
Bleeding | |||
7 | Carrying out bleeding operation | ||
| 000 588 01 82 00 Filling unit | ||
MODEL 231Bleed screw on brake caliper | |||
Bleed screw to brake caliper | |||
8 | Switch off filler/bleeder unit (01) and remove from brake fluid expansion reservoir (2) | ||
9 | Screw cap (1) onto brake fluid expansion reservoir (2) | ||
| Check | ||
10 | Check brake system for leaks | ||
11 | Check fluid level in brake fluid expansion reservoir (2); correct if necessary | ||
| |||
| Install | ||
12 | Mount front wheel and tire assemblies | ||
| |||
13 | Close engine hood |