Remove/install wheels, rotate if necessary

AP40.10-P-4050EW

Remove/install wheels, rotate if necessary

14.11.2018

Model

166, 212, 218, 231

Left illustration

1 bis 5

Tightening sequence

Right figure

Pfeile

Interchange wheel-and-tire assemblies (vehicles without mixed tires)

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Topical note

Limited maximum speed for winter tires with speed index V

AH40.10-P-1020-03A

Topical note

Information on tires / rims

AH40.10-P-9411-01A

Topical note

Notes on handling, transport and storage of ceramic brake disks

AH42.10-P-9406-13A



Remove

1

Lift vehicle on vehicle lift

Model 166, 212, 218, 231



MODEL 166

AR00.60-P-1000GZ



Model 231

AR00.60-P-1000TX

2

Remove hubcaps

Vehicles with hubcaps

3

Unscrew wheel bolts and remove wheel-and-tire assemblies


For model 166 and vehicles with code (B07) Ceramic brake system, remove wheel-and-tire assembly using wheel lift only.
The brake disks and complete wheels can otherwise be damaged.



Check

4

Check tires for signs of damage and make sure that they are in good condition

AP40.10-P-4051EW



Install

5

Clean and check wheel bolt connection components, then protect against corrosion

AP40.10-P-4050-01A


Before mounting a wheel-and-tire assembly all the operation steps listed in the linked description must be conducted carefully.
The complete wheel can otherwise work its way loose from the vehicle.

Paste, hot lubrication 1 kg, DBL 6879.20

*BR00.45-Z-1005-06A

6

Change round wheel-and-tire assemblies on front and rear axles

If necessary, subject to separate repair order and only for vehicles without mixed tires.


Maintain running direction of wheel and tire assemblies.
Otherwise handling characteristics and handling comfort may be impaired and tire wear increased.

7

Mount wheel-and-tire assembly and tighten wheel bolts


For model 166 and vehicles with code (B07) Ceramic brake system, mount wheel-and-tire assembly using wheel lift only.
The brake disks and complete wheels can otherwise be damaged.

 Observe the tightening sequence (1 to 5) and tightening torque.

 Model 166Wheel bolt

*BA40.10-P-1001-01J

 Model 212
Model 218Wheel bolt

*BA40.10-P-1001-01M

 Model 231Wheel bolt

*BA40.10-P-1001-01A

8

Lower vehicle

9

Correct tire pressure of front and rear axle tires

AP40.15-P-4061A

In the event of unusual tire pressure loss:



Determine and rectify cause, subject to separate repair order.

10

Mount hubcaps

Vehicles with hubcaps


Check for correct positioning of hubcap to valve and for correct seating.
Otherwise the valve will be damaged or the hubcap will be lost.

11.1

Activate the tire pressure monitoring system

Only vehicles with CODE 475 (Tire pressure monitor)



AR54.30-P-1000-02RAU

 Only for wheel-and-tire assembly change, tire replacement or a change in tire pressure.

11.2

Activate tire pressure loss warning

Only vehicles except CODE 475 (Tire pressure monitor)



AR54.30-P-1000-02RAE

 Only for wheel-and-tire assembly change, tire replacement or a change in tire pressure.

 Wheels

Number

Designation

Model 231

BA40.10-P-1001-01A

Wheel bolt

Nm

130

 Wheels

Number

Designation

Model 166

BA40.10-P-1001-01J

Wheel bolt

Nm

150

 Wheels

Number

Designation

Model 212

Model 218

BA40.10-P-1001-01M

Wheel bolt

Nm

130

130

Repair materials

Number

Designation

Order number

BR00.45-Z-1005-06A

Paste, hot lubrication 1 kg, DBL 6879.20

A 000 989 76 51