Bleed brake system

AR42.10-P-0010AK

Bleed brake system

14.4.11

MODEL 169.006 /007 /008 /031 /032 /033 /034 /090 /306 /307 /308 /331 /332 /333 /334

MODEL 245.207 /208 /231 /232 /233 /234

P42.00-2117-09

Shown on model 169.3

1 Right rear floating brake caliper

2 Left rear floating brake caliper

5 Hose

6 Brake fluid receptacle

3 Right front floating brake caliper

4 Left front floating brake caliper

Modification notes

29.7.09	Value changed: bleed screw to brake caliper		*BA42.10-P-1001-10N
	Value changed: bleed screw to brake caliper		*BA42.10-P-1003-12N

	Bleeding
Danger!	Risk of poisoning caused by swallowing brake fluid. Risk of injury caused by brake fluid coming into contact with skin and eyes.	Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.	AS42.50-Z-0001-01A
 Danger!	Risk of death caused by vehicle slipping or toppling off lifting platform	Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
	Notes on repairs to brake system		AH42.00-P-0003-01A
	Brake fluid notes		AH42.50-P-0001-01A
1	Open engine hood
2	Connect brake fluid change device to brake fluid reservoir and switch on	 Follow the operating instructions for the brake fluid changing unit.
		Brake fluid changing equipment gotis://B_42/43.2_01
	General brake fluid	Sheet 330.1	BB00.40-P-0330-01A
	Brake fluids (DOT 4 plus)	Sheet 331.0	BB00.40-P-0331-00A
3	Raise vehicle		AR00.60-P-1000AK
	Bleeding
4	Remove dust cap, connect hose (5) of brake fluid receptacle (6) on brake bleeder valve of right rear floating brake caliper (1) and open and close brake bleeder valve	 Close the brake bleeder valve only after the brake fluid escapes free of bubbles and without contamination (bright color of brake fluid).
			*BA42.10-P-1003-12N
5	Perform bleeding process on left rear floating brake caliper (2), right front floating brake caliper (3) and left front floating brake caliper (4) in same manner	 Observe correct sequence.
			*BA42.10-P-1001-10N
			*BA42.10-P-1003-12N
6	Press dust cap onto brake bleeder valve
7	Lower vehicle		AR00.60-P-1000AK
8	Switch off brake fluid replacement unit and disconnect	 Observe owner's manual of brake fluid replacement unit.
		Brake fluid changing equipment gotis://B_42/43.2_01.1
9	Check brake fluid level and correct if necessary
	Brake system - inspect fluid level		AP42.10-P-4210AK
10	Check brake system for leaks		AR42.10-P-0100-01AK

 Front axle brake caliper

Number	Designation		Model 169	Model 245


BA42.10-P-1001-10N	Bleed screw to brake caliper	Nm	14	14

 Rear axle brake caliper

Number	Designation		Model 169	Model 245


BA42.10-P-1003-12N	Bleed screw to brake caliper	Nm	14	14

เอกสารที่อ้างถึง