AR40.30-P-0451GC | Measure steering knuckle (when removed) | 7.10.96 |
MODEL 168.006 /007 /008 /009 /031,
WDB168.032,
9BM168.032,
168.033 /035 /109 /131 /132 /133 /135
MODEL 414.700
P40.30-0349-09
03 Height marking device
4 Steering knuckle
Dim. "A" Height of mounting bore for flange joint
Dim. "B" Height of mounting bore for tie rod joint
Dim. "C" Height of mounting bore for floating caliper
Dim. "D" Height of mounting bore for bottom spring strut
Dim. "E" Height of mounting bore for top spring strut
| Remove | ||
1 | Remove steering knuckle | For this test the front axle shaft flange must not be removed. | |
Model 168 | |||
Model 414.700 | |||
| Measuring | ||
2 | Place steering knuckle with front axle shaft flange on a measuring plate | ||
3 | Measure and note height | Measure dimension "C" at the flat surface of the floating caliper mounting. | |
| |||
Dim. "C" = Mounting bore for floating caliper | |||
|
Test values for steering knuckle
Number | Designation | Model 168 | Model 414.700 | ||
BE40.30-P-1001-01C | Height of steering knuckle | Dim." A" | mm | 83,21 | 83.2 (1) |
Dim." B" | mm | 64,51 | 63.5 (1) | ||
Dim. "C" | mm | 78,51 | 78.5 (1) | ||
Dim. "D" | mm | 119,41 | 118.4 (1) | ||
Dim." E" | mm | 133,71 | 132.7 (1) | ||
Fig. see | |||||
Commercially available tools