P40.30-0269-01
P40.30-0268-01
P40.30-0271-01
P40.30-0270-01
| Removing, installing | ||
1 | Remove, install wheel carrier | ||
| Measuring | ||
2 | Place wheel carrier for measurement with the wheel hub or brake disk on parallel supports | | |
3 | Measure and note height dimension ”A” as comparative measurement with the height marking device | Measure at the flat surface of the torsion bar fixing (77a). | |
4 | Measure and note height dimension ”B1-B3” at the lowest point of the respective bore | The test values are the difference between the height dimension ”A” and the height dimensions: ”B3” = Torque strut |
Test values – wheel carrier
Number | Designation | Model 140 | ||
BE40.30-P-1001-02A | Difference in height measurement | ”A” – ”B1” | mm | 25.91 |
”A” – ”B2” | mm | 56.31 | ||
”B3” – ”A” | mm | 51.11 | ||
Refer to illustration | ||||
Commercially available tools