Test values for distance and comparison measurement on front axle
Number | Designation | Model | ||
BE40.30-P-1001-06D | Dimension | V1 | mm | 4 |
V2 | mm | 4 | ||
V3 | mm | 3 | ||
V5 | mm | 1295 (3) | ||
V6 | mm | 3 | ||
V7 | mm | - | ||
V8 | mm | 860 (2) | ||
V9 | mm | 840 (2) | ||
V10 | mm | 3 | ||
Fig. see | - | |||
170 589 00 63 00
168 589 07 63 00
124 589 01 19 00
124 589 02 19 00
Mount
Telescopic measuring rod
Telescopic measuring rod
Set of measurement fixtures
124 589 08 63 00
Connecting pieces
The measuring set 168 589 07 63 00 is designed in such a way, that the measuring bolts, according to the measuring points at the vehicle, can be screwed together out of mounting bolts, extensions and measuring tips.
The configuration of the measuring bolts is shown in the table, where the numbers in the column headed "Measuring bolt configuration" are the special tool end numbers.
Ex.: 02/06/10 = 168 589 07 63 02 (support stud)
168 589 07 63 06 (extension)
168 589 07 63 10 (measuring tip)
Distance and comparison measurement | Measuring bolt configuration | Telescopic measuring rod |
V1 | 02/10 | 124 589 02 19 00 |
V2 | 02/06/08/05/Socket attachment | 124 589 02 19 00 |
V3 | 02/07/10 | 124 589 01 19 00 |
V5 | 02/08/12 | 124 589 02 19 00 |
V6 | 02/08/10 | 124 589 02 19 00 |
V8 | 02/08/05/Socket attachment | 124 589 01 19 00 |
V9 | 02/08/05/Socket attachment | 124 589 01 19 00 |
V10 | 02/08/05/Socket attachment | 124 589 02 19 00 |
P40.30-2214-11
1 Reference dimension "V1" as measured between reference socket "K" and ball joint on radius rod (18), left to right.
The bearings at the tension arm and cross strut must be in perfect condition in order to assess the consequences of an accident. Because of the inaccuracies resulting from the tolerances of the bearings, the dimension "V1" is only partially usable.
P40.30-2215-11
2 Comparison measurement "V2" measured from left to right from the check bore "K" to the retaining bolt for the front axle carrier at the front.
This measurement is a reference dimension for the body.
P40.30-2216-11
3 Reference dimension "V3" as measured from reference socket "K" to center of bolt holding transverse link to front subframe, left to right.
P40.30-2217-06
4 Clearance dimension "V5"as measured between the left and right front strut domes, at the reference sockets.
This dimension can only be used to a certain extent to assess consequential damage, and where applicable a measurement must be performed on a comparable vehicle.
P40.30-2218-11
5 Reference dimension "V6"as measured between reference socket "K" and the center of the bolts holding the radius rod to the front subframe, left to right.
P40.30-2219-06
6 Distance measurement "V8" measured to the centers of the torx bolt heads between the rear mountings of the front axle carrier.
P40.30-2220-06
7 Distance measurement "V9", measured from centering point of the torx bolt heads between the front bearings of the front axle carrier.
P40.30-2221-06
8 Clearance dimension "V10", measured diagonally between the center of the Torx bolt heads on the front and rear supports for the front subframe, left to right.