Test values for distance and comparison measurement on front axle
Number | Designation | Model 212 | Model 218 | ||
BE40.30-P-1001-06I | Dimension | V1 | mm | 880 (2) | 880 (2) |
V2 | mm | 1315 (2) | 1315 (2) | ||
V3 | mm | 955 (2) | 955 (2) | ||
V4 | mm | 854 (2) | 854 (2) | ||
V5 | mm | 818 (2) | 818 (2) | ||
See picture | |||||
170 589 00 63 00
168 589 07 63 00
124 589 01 19 00
124 589 02 19 00
Mount
Telescopic measuring rod
Telescopic measuring rod
Set of measurement fixtures
124 589 08 63 00
Connecting pieces
The measuring set is designed in such a way, that the measuring bolts, according to the measuring points at the vehicle, can be screwed together out of mounting bolts, extensions and measuring tips/bolts.
The configuration of the measuring bolts is shown in the table, where the digits in the column headed "Measuring bolt configuration" are the special tool end numbers.
For example: 02/08/10 = 168 589 07 63 02 (support stud)
168 589 07 63 08 (extension)
168 589 07 63 10 (measuring tip)
Clearance | Measuring bolt configuration | Telescopic measuring rod |
V1 | 02/06/07/05/socket wrench bit | 124 589 01 19 00 |
V2 | 02/09/08/05/socket wrench bit | 124 589 02 19 00 |
V3 | Left: 02/07/05/socket Right: 02/08/05/socket | 124 589 02 19 00 |
V4 | 02/08/05/socket wrench bit | 124 589 01 19 00 |
V5 | 02/08/05/socket wrench bit | 124 589 01 19 00 |
P40.30-2345-11
1 Measure distance dimension (V1) from check point (K) to center of Torx bolt head of rear mount of front axle carrier. Measure on the left and right side in each case.
If necessary, unscrew and screw in Torx bolts and check for deformation.
P40.30-2346-11
2 Measure distance dimension (V2) from check point (K) to center of Torx bolt head of front mount of front axle carrier. Measure on the left and right side in each case.
If necessary, unscrew and screw in Torx bolts and check for deformation.
P40.30-2347-11
3 Measure distance dimensions (V3) diagonally between the centering point of the Torx bolt heads of the front and rear mount of the front axle carrier.
P40.30-2303-11
4 Measure distance dimension (V4) from the centering point of the Torx bolt heads between the front bearings of the front axle carrier.
Shown on model 204.0 without 4MATIC
P40.30-2304-11
5 Measure distance dimension (V5) from the centering point of the Torx bolt heads between the rear bearings of the front axle carrier.
Shown on model 204.0 without 4MATIC