Check and adjustment values for caster
Number | Designation | Model | Model | |
BE40.20-N-1001-20A | Permissible difference in caster between right and left sides of the vehicle | ° | 30' | 30' |
BE40.20-N-1002-20A | Caster for vehicle level | +11.2° | +6° 01'(30') | +5° 32'(30') |
+10.4° | +6° 04'(30') | +5° 34'(30') | ||
+9.6° | +6° 07'(30') | +5° 37'(30') | ||
+8.8° | +6° 10'(30') | +5° 38'(30') | ||
+8.0° | +6° 12'(30') | +5° 41'(30') | ||
+7.2° | +6° 15'(30') | +5° 43'(30') | ||
+6.4° | +6° 17'(30') | +5° 46'(30') | ||
+5.6° | +6° 20'(30') | +5° 47'(30') | ||
+4.8° | +6° 23'(30') | +5° 50'(30') | ||
+4.0° | +6° 26'(30') | +5° 52'(30') | ||
+3.2° | +6° 29'(30') | +5° 55'(30') | ||
+2.4° | +6° 31'(30') | +5° 56'(30') | ||
+1.6° | +6° 34'(30') | +5° 59'(30') | ||
+0.8° | +6° 37'(30') | +6° 01'(30') | ||
0.0° | +6° 40'(30') | +6° 04'(30') | ||
-0.8° | +6° 43'(30') | +6° 05'(30') | ||
Check and adjustment values for caster
Number | Designation | Model | Model | |
BE40.20-N-1001-20A | Permissible difference in caster between right and left sides of the vehicle | ° | 30' | 30' |
BE40.20-N-1002-20A | Caster for vehicle level | +11.2° | - | +5° 32'(30') |
+10.4° | - | +5° 34'(30') | ||
+9.6° | - | +5° 37'(30') | ||
+8.8° | - | +5° 38'(30') | ||
+8.0° | - | +5° 41'(30') | ||
+7.2° | - | +5° 43'(30') | ||
+6.4° | - | +5° 46'(30') | ||
+5.6° | - | +5° 47'(30') | ||
+4.8° | - | +5° 50'(30') | ||
+4.0° | - | +5° 52'(30') | ||
+3.2° | - | +5° 55'(30') | ||
+2.4° | - | +5° 56'(30') | ||
+1.6° | - | +5° 59'(30') | ||
+0.8° | - | +6° 01'(30') | ||
0.0° | - | +6° 04'(30') | ||
-0.8° | - | +6° 05'(30') | ||
BE40.20-N-1003-20A | Caster for vehicle level | +10.5° | +6° 04'(30') | - |
+9.5° | +6° 07'(30') | - | ||
+8.6° | +6° 10'(30') | - | ||
+7.7° | +6° 13'(30') | - | ||
+6.8° | +6° 17'(30') | - | ||
+5.9° | +6° 20'(30') | - | ||
+5.0° | +6° 23'(30') | - | ||
+4.0° | +6° 26'(30') | - | ||
+3.1° | +6° 29'(30') | - | ||
+2.2° | +6° 32'(30') | - | ||
+1.3° | +6° 35'(30') | - | ||
+0.4° | +6° 38'(30') | - | ||
-0.6° | +6° 41'(30') | - | ||
-1.5° | +6° 44'(30') | - | ||
-2.4° | +6° 48'(30') | - | ||
-3.3° | +6° 51'(30') | - | ||
The level values are displayed by the electronic inclinometer in decimal degrees.
1 Measure vehicle level on one side of vehicle and find specified value for caster in table.
The caster cannot be adjusted but it must be checked to ensure the chassis geometry is correct.
2 Measure the actual caster as part of the axle alignment and compare with the specified values.
Compare the measured caster angles of both vehicles sides and determine if the permissible tolerance was exceeded.
Example:
Level of front axle 10.5°
= Front axle caster value 6° 04'