Model | 906.15/65 |
with code A50 (Front axle with increased load capacity) | |
with code ZU7 (National version for Canada) | |
except code RH9 (Super-single tyres, 285/65 R16 C) | |
except code ZG1 (Engageable all-wheel drive) | |
except code ZG3 (Engageable all-wheel drive with gear reduction) | |
except code ZU8 (National version for USA) | |
Model | 906.15/65 |
with code A50 (Front axle with increased load capacity) | |
with code ZU8 (National version for USA) | |
except code RH9 (Super-single tyres, 285/65 R16 C) | |
except code ZG1 (Engageable all-wheel drive) | |
except code ZG3 (Engageable all-wheel drive with gear reduction) | |
except code ZU7 (National version for Canada) | |
Model | 906.15/65 |
with code ZU7 (National version for Canada) | |
except code A50 (Front axle with increased load capacity) | |
except code RH9 (Super-single tyres, 285/65 R16 C) | |
except code ZG1 (Engageable all-wheel drive) | |
except code ZG3 (Engageable all-wheel drive with gear reduction) | |
except code ZU8 (National version for USA) | |
Model | 906.15/65 |
with code ZU8 (National version for USA) | |
except code A50 (Front axle with increased load capacity) | |
except code RH9 (Super-single tyres, 285/65 R16 C) | |
except code ZG1 (Engageable all-wheel drive) | |
except code ZG3 (Engageable all-wheel drive with gear reduction) | |
except code ZU7 (National version for Canada) |
Test and adjustment values for caster |
Number | Designation | Model 906.15/65 with code A50+ZU7 except code RH9/ZG1/ZG3/ZU8, model 906.15/65 with code A50+ZU8 except code RH9/ZG1/ZG3/ZU7, model 906.15/65 with code ZU7 except code A50/RH9/ZG1/ZG3/ZU8, model 906.15/65 with code ZU8 except code A50/RH9/ZG1/ZG3/ZU7 | |
BE40.20-N-1001-20M | Caster values, form | ||
See | |||
Test and adjustment values for caster |
Number | Designation | Model 906.15/65 with code A50+ZU7 except code RH9/ZG1/ZG3/ZU8, model 906.15/65 with code A50+ZU8 except code RH9/ZG1/ZG3/ZU7, model 906.15/65 with code ZU7 except code A50/RH9/ZG1/ZG3/ZU8, model 906.15/65 with code ZU8 except code A50/RH9/ZG1/ZG3/ZU7 | |
BE40.20-N-1002-20M | Permissible difference in caster between right and left side of vehicle | ° | 30' |
Test and adjustment values for caster |
Number | Designation | Model 906.15/65 with code A50+ZU7 except code RH9/ZG1/ZG3/ZU8, model 906.15/65 with code A50+ZU8 except code RH9/ZG1/ZG3/ZU7, model 906.15/65 with code ZU7 except code A50/RH9/ZG1/ZG3/ZU8, model 906.15/65 with code ZU8 except code A50/RH9/ZG1/ZG3/ZU7 | |
BE40.20-N-1003-20M | Absolute caster tolerance | ° | 30' |
1 | Measure level of front axle and rear axle on one side of the vehicle and find the specified value for the caster in the table. |
2 | Determine actual caster values. |
3 | Compare specified value for caster against actual caster value and determine whether the permissible tolerance is met. |
The caster cannot be adjusted but it must be checked to ensure the chassis geometry is correct. |