ar4015g0410b

Remove/install radial shaft sealing rings of tire pressure control system

ประเภท ar · หัวข้อ 40.15 · เวอร์ชัน 0102 · 2014-08-05

ใช้กับ: MODEL 405.05/09/10/11/12/20/22 with CODE A30 (Tire pressure control system (tire control)) MODEL 437.42/43/46 with CODE A30 (Tire pressure control system (tire control))

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 2 Chassis › 40 Wheels, chassis alignment check › 40.15 Tire pressure/tire pressure monitoring — ซีรีส์ 405 (รุ่น 05*, 09*, 10*, 11*, 12*, 20*, 22*) · ซีรีส์ 437 (รุ่น 42*, 43*, 46*)

EinPAS 26 Active safety system › 26.29 Tire pressure loss detection system/tire pressure control › 26.29.1 Basic information — ซีรีส์ 405 (รุ่น 05*, 09*, 10*, 11*, 12*, 20*, 22*) · ซีรีส์ 437 (รุ่น 42*, 43*, 46*)

AR40.15-G-0410B

Remove/install radial shaft sealing rings of tire pressure control system

28.07.2014

MODEL

405.05/09/10/11/12/20/22

with CODE A30 (Tire pressure control system (tire control))

MODEL

437.42/43/46

with CODE A30 (Tire pressure control system (tire control))

Remove/install radial shaft sealing rings of tire pressure control system

1

Sleeve

2

Retaining ring

3

Radial shaft sealing ring

4

Radial shaft sealing ring

Pfeil

Graphite coating

G40.16-3172-74

Remove/install

1

Remove sleeve (1) of tire pressure control system

AR40.15-G-0400B

2

Remove retaining ring (2)

3

Remove radial shaft sealing ring (3)

Installation: Observe installation position, see figure.

4

Remove radial shaft sealing ring (4)

Installation:
The radial shaft sealing ring (4) with graphite coating (arrow) must be installed first.
Leaks may occur otherwise.

Installation: Observe installation position, see figure.

5

Install in the reverse order

เอกสารที่อ้างถึง