Remove/install wheel and tire assemblies

AR40.10-P-1102ME

23.07.2019

Model

167

Remove/install wheel and tire assemblies

1	Complete wheel
2	Wheel lift

P40.10-7124-12

1	Complete wheel
5	Torsion bar

P40.10-7098-12

1	Complete wheel

P40.10-7092-11

Topical note	Information on tires / rims		AH40.10-P-9411-01A
Topical note	Notes on handling, transport and storage of composite brake disks		AH42.10-P-9406-12LF
	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove
1	Raise vehicle.		AR00.60-P-1006A
2	Remove wheel trims.	If installed.
3	Remove wheel and tire assemblies (1).	 Only for Use a wheel lift dolly (2) with a rim size from 17".
		 Socket wrench	*199589010900
	Check
4	Check components of wheel threaded connection.	 Before mounting a wheel and tire assembly (1), remove minor soiling using a rag. Apply heat-resistant lubricating paste sufficiently on wheel hub.
		Paste, hot lubrication 1 kg, DBL 6879.20	*BR00.45-Z-1005-06A
		If problems occur,
		
		clean components of wheel threaded connection and protect against corrosion.
		If enough soiling is present,
		
		carry out further cleaning and anti-corrosion protection measures.
			AR40.10-P-1100-02A
5	Check tires of wheel and tire assemblies (1) for wear and damage.	On the wheel and tire assemblies (1) to be installed.
			AP40.10-P-4051EW
	Install
6	Install wheel and tire assemblies (1).	 Only for Use a wheel lift dolly (2) with a rim size from 17".
		 Commercially available devices/tools Use torsion bar (5) with 75 Nm for 2nd stage (initial torque).
		 Observe tightening sequence "A, B, C, D, E" and the multistage tightening torque of the wheel bolts.
		 Wheel bolt	*BA40.10-P-1001-01O
		 Socket wrench	*199589010900
7	Install wheel trims.	If installed.
		 Check for firm seating of wheel trim on rim and for correct positioning of wheel trim relative to valve. Otherwise, there is a risk of losing the wheel trim or of damaging the valve.
8	Check tire pressure on wheel and tire assemblies (1).	Only when changing tire.
			AP40.15-P-4061A
		In the event of a problem,
		
		correct tire pressure on wheel and tire assemblies (1).
9	Restart tire pressure monitor (TPM) or tire pressure loss warning via the instrument cluster.	Only when changing tire.
			AP40.15-P-4069U
10	Check maximum speed limitation in instrument cluster, correct if necessary.	Only when changing tire.
Topical note	Limited maximum speed for winter tires with speed index V		AH40.10-P-1020-03A
	Information about regulations for recommended wheel/tire combinations		AH40.10-P-0003-01A
		 Note tire speed rating.
		If the maximum permissible speed of an M+S tire is lower than the maximum permissible speed of the vehicle.
		
		Apply corresponding adhesive label in the driver's visual field.

 Wheels

Number	Designation			Model 167
BA40.10-P-1001-01O	Wheel bolt	Stage 1 (position by hand)	Nm	-
		Stage 2 (initial torque)	Nm	75
		Stage 3	Nm	150

199 589 01 09 00

Socket wrench

Repair materials

Number	Designation	Order number
BR00.45-Z-1005-06A	Paste, hot lubrication 1 kg, DBL 6879.20	A 000 989 76 51

เอกสารที่อ้างถึง