Replace tires

AR40.10-P-1030LFS

Replace tires

18.09.2019

Model

222

with code Z07 (B7 armoring on special protection version)

1

Tires

4

Support ring

5

Disk wheel

Tires - General information

AH40.10-N-1020-01A



Disassemble

1

Remove Pax emergency spare tire system



AP40.10-P-4050HA

2

Remove bonded wheel balance weights using removal tool


Do not use hard, pointed or sharp-edged tools.
Otherwise, the surface of the disk wheel (5) can be damaged.

 Removal tool

*129589005900

3

Remove valve element from valve

4

Remove tires (1) and support ring (4)

AR40.10-P-1030-01LFS



Check

5

Check tire (1) for visible cord points

In the event of damage to tire (1)



Replace damaged part

6

Check support ring (4) for tearing, pressure marks or deformation at the bars

In the event of damage to support ring (4)



Replace damaged part

7

Check tire pressure sensor and valve body in the installed condition for damage


Do not retighten union nut.
The tire pressure sensor will be damaged otherwise.


Only use plastic valve caps.
Otherwise corrosion damage may occur.

 If the union nut or tire pressure sensor is visibly loose or damage is visible, the respective tire pressure sensor must be replaced.



Clean

8

Clean tire pressure sensor


Only remove dirt with a clean, lint-free cloth. Do not use compressed air, solvents or cleaners.
The tire pressure sensor will be damaged otherwise.



Assemble

9

Mount tires (1) and support ring (4)

AR40.10-P-1030-02LFS

10

Inflate tire (1)

11

Screw valve element into valve

12

Correct tire inflation pressure

 See tire pressure label in the vehicle's fuel filler flap.

13

Balance complete wheel

AR40.10-P-1040EW

14

Mount complete wheel



AP40.10-P-4050HA

15

Activate the tire pressure monitoring system

Model 222
with code 475 (Tire pressure monitor (TPM))
with code Z07 (B7 armoring on special protection version)

AR54.30-P-1001-01LC