Remove/install wheels, rotate if necessary

AP40.10-P-4050HA

22.08.2019

Model

217, 222

Remove/install wheels, rotate if necessary

P40.10-4915-01

Tightening sequence


	Interchange wheel-and-tire assemblies (vehicles without mixed tires)

P40.10-4106-01

 Danger	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
Topical note	Limited maximum speed for winter tires with speed index V		AH40.10-P-1020-03A
Topical note	Information on tires / rims		AH40.10-P-9411-01A
Topical note	Notes on handling, transport and storage of composite brake disks		AH42.10-P-9406-12LF
Topical note	Notes on handling, transport and storage of ceramic brake disks		AH42.10-P-9406-13A
	Preparatory activity
1	Lift vehicle with lifting platform.
			AR00.60-P-1000LF
	Remove
2	Remove hub caps.	Vehicle with hubcaps.
3	Remove wheel bolts and remove wheel and tire assemblies using wheel lift dolly.	 Remove wheel and tire assemblies using wheel lift dolly only. The brake disks and complete wheels can otherwise be damaged.
	Check
4	Check tires for damage and condition.		AP40.10-P-4051EW
		If problems occur,
		
		Rectify problem.
		 After obtaining special order.
5.1	Check manufacturing date of tires on front and rear axle.	Model 222 with code Z07 (Top protection) Countries with temperate climate.
		If the manufacturing date is more than 6 years ago or if the mileage is higher than 15,000 km in countries with a temperate climate, if the load per tire does not exceed max. half the load capacity per axle or max. 100% of the load index of the tire,
		
		for safety reasons, replace the tire.
		Model 222 (except 222.077/177/178/179/187/188) with code Z07 (Top protection)	GF40.10-P-1008YE
		 After obtaining special order.
5.2	Check manufacturing date of tires on front and rear axle.	Model 222 with code Z07 (Top protection) Countries with hot climate.
		If the manufacturing date is more than 6 years ago or the mileage is higher than 10,000 km in countries with a hot climate, if the load per tire does not exceed max. half the load capacity per axle or max. 100% of the load index on the tire,
		
		for safety reasons, replace the tire.
		Model 222 (except 222.077/177/178/179/187/188) with code Z07 (Top protection)	GF40.10-P-1008YE
		 After obtaining special order.
	Install
6	Clean and check components of wheel threaded connections, and protect against corrosion.		AP40.10-P-4050-01A
		 Before mounting a wheel-and-tire assembly conduct all the operation steps listed in the linked description carefully. The complete wheel can otherwise work its way loose from the vehicle.
		Paste, hot lubrication 1 kg, DBL 6879.20	*BR00.45-Z-1005-06A
7	Swap over wheel and tire assemblies on front and rear axle.	If necessary, subject to a separate repair order and only for vehicles without mixed tires.
		 Maintain running direction of wheel and tire assemblies. Otherwise handling characteristics and handling comfort may be impaired and tire wear increased.
8	Mount wheel and tire assemblies using wheel lift dolly and tighten wheel bolts.	 Mount wheel and tire assemblies using wheel lift dolly only. The brake disks and complete wheels can otherwise be damaged.
		 Note tightening sequence (1 to 5) and tightening torque stages 1 to 3. Otherwise, the complete wheel may be damaged or work its way loose from the vehicle.
		 Wheel bolt	*BA40.10-P-1001-01P
9	Lower vehicle with vehicle lift.
			AR00.60-P-1000LF
10	Correct tire pressure of tires on front and rear axle.		AP40.15-P-4061A
		If an unusual tire pressure loss occurs,
		
		determine cause and correct.
		 After obtaining special order.
11	Install hub caps.	Vehicle with hubcaps.
		 Check hubcaps are correctly positioned relative to valve and that it is securely seated. Otherwise the valve will be damaged or the hubcaps will be lost.
12.1	Activate tire pressure monitoring system.	Model 217 with code 475 (Tire pressure monitor (TPM)) Model 222 with code 475 (Tire pressure monitor (TPM)) Only for wheel-and-tire assembly change, a tire replacement or a change in tire pressure.
			AR54.30-P-1001-01LC
12.2	Activate tire pressure loss warning.	Model 217 except code 475 (Tire pressure monitor (TPM)) Model 222 except code 475 (Tire pressure monitor (TPM)) Only for wheel-and-tire assembly change, a tire replacement or a change in tire pressure.

 Wheels

Number	Designation			Model 217	Model 222 except code Z07 (Top protection)
BA40.10-P-1001-01P	Wheel bolt	Stage 1 (position by hand)	Nm	-	-
		Stage 2 (initial torque)	Nm	75	75
		Stage 3	Nm	150	150

 Wheels

Number	Designation			Model 222 with code Z07 (Top protection)
BA40.10-P-1001-01P	Wheel bolt	Stage 1 (position by hand)	Nm	-
		Stage 2 (initial torque)	Nm	75
		Stage 3	Nm	180

Repair materials

Number	Designation	Order number
BR00.45-Z-1005-06A	Paste, hot lubrication 1 kg, DBL 6879.20	A 000 989 76 51

เอกสารที่อ้างถึง