Remove/install wheel hub with axle tube

AR35.50-W-0085A

9.12.09

REAR AXLE 749.011
Dual-tired trailing axle (Nummek)

W35.50-1040-06

1 Screw

2 Oscillating lever

3 Self-locking nut

4 Brake wear sensor connector

5 Wheel hub with axle tube

 	Remove/install
1	Remove wheels		AR40.10-W-1100A
2	Remove double brake cylinder		AR42.10-W-0700A
3	Disconnect brake wear sensor connector plug (4)		*BA42.10-N-1002-12B
4	Remove bolts and nuts (1 and 3) from oscillating lever (2)	  Installation: Use new self-locking nuts (3). The innermost bolt (1) must engage in the cut recess (arrow) of the axle tube.	*BA35.50-N-1002-03A
5	Spread clamping halves of oscillating lever (2)	 Use suitable wedges (e.g. flat chisel).
6	Pull out wheel hub with axle tube (5)	 Mount wheel hub with axle tube in suitable lifting device.
7	Install in the reverse order

 Trailing axle

Number	Designation		Trailing axle 749.011


BA35.50-N-1002-03A	Nut, axle tube to oscillating lever	Nm	225

Rear axle brake caliper

Number	Designation		Model 375.3/4, 930, 932, 933, 934, 950, 952, 953, 954, 957


BA42.10-N-1002-12B	Bolt connecting brake wear sensor to brake caliper	Nm	1