Remove/install trailing axle relay valve

AR35.50-T-0030A

17.6.02

Rear axle 749.731 in MODEL 375.323 with CODE (AN5) Trailing axle, lifting

Rear axle 749.732 in MODEL 375.321 with CODE (AN5) Trailing axle, lifting

Rear axle 749.733 in MODEL 375.322 /381 with CODE (AN5) Trailing axle, lifting

T35.50-0026-01

1 Relay valve

2 Compressed-air line

3 Vent connection

4 Compressed-air line

5 Compressed-air line

 	Remove/Install
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
1	Discharge compressed-air system
2	Label compressed-air lines (2, 4, 5) in relation to connections.
3	Detach compressed-air lines (2, 4, 5) from relay valve (1).	With compressed air connector system "VOSS 230".	AR42.10-W-0900A
		With compressed air connector system "VOSS 232" (NG 8, 12) or "SCHÄFER SDF" (NG 6).	AR42.10-W-0900C
		 Installation: check O-rings, install new O-rings if necessary, and observe labeling of compressed-air lines (2, 4, 5).
	Notes on compressed air connector systems		AH00.18-N-0001-01A
4	Detach vent connection (3) from relay valve (1).	 Installation: the vent connection (3) must latch audibly.
5	Remove relay valve (1).
6	Install in the reverse order