Differential assembly with differential
Number | Designation | Rear axle | Rear axle | |||
BA35.30-N-1001-03H | Adjusting bolt for sliding block of ring gear | ° | -60 | -60 | ||
Differential assembly with differential
Number | Designation | Rear axle | |||
BA35.30-N-1001-03H | Adjusting bolt for sliding block of ring gear | ° | -60 | ||
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-06A | Long-life grease | A 000 989 63 51 11 |
BR00.45-Z-1018-06A | MB multipurpose grease | - |
T35.30-0007-01
Remove
1 Loosen jam nut (1) of adjustment screw (2).
2 Remove adjustment screw (2) from rear axle housing.
The sliding block then drops into the rear axle housing from where it must be removed as quickly as possible.For this reason, the adjustment screw may only be unscrewed through a maximum of 2 turns during adjustment operations.
Installation
3 Attach sliding block to ring gear using multipurpose grease.
4 Turn ring gear until the bore of the sliding block is flush with the bore of the adjustment screw (2) in the rear axle housing.
5 Coat adjustment screw (2) with long-life grease.
6 Screw in adjustment screw (2) until the sliding block contacts the ring gear.
7 Turn adjustment screw (2) back by the specified tightening angle and tighten jam nut (1).