Test and adjustment values for rear axle drive
Number | Designation | Rear axle 741.40/43 | Rear axle 741.130/131 | Rear axle 741.52/53/ 54/55 | ||
BE35.30-N-1003-01B | Pulling power for measuring friction torque of differential housing bearing (preload) | O | 35 to 45 | 35 to 45 | 35 to 45 | |
D35.30-0061-01
1 Wind a cord around the differential housing several times.
2 Use a spring balance (03) to determine the pulling force. The measured value must match the specified friction coefficient.
If the specified value is exceeded or not attained, adjust the friction coefficient
(= preload of the differential bearings) by installing thicker or thinner shims as appropriate.