Remove/install semi-trailing arm of rear axle

AR35.15-D-0300H

11.1.10

REAR AXLE 741.417 in MODEL 906.132 /134 /136

D35.15-0001-11

1 Bolt

2 Semi-trailing arm

3 Bolt

4 Bracket

5 Brake cable

6 Link rod

7 Line

8 Bolt

9 Rear axle shaft

10 Nut

11 Brake disk

 	Remove/install
 Danger!	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.	AS00.00-Z-0010-01A
1	Remove rear wheels		AR40.10-D-1100H
2	Unscrew brake caliper carrier with brake caliper upper part	 Tie brake caliper to wheel well using welding wire so the brake hose is exposed without tension.
			*BA42.10-N-1008-12A
3	Remove rear spring		AR32.20-D-0230HA
4	Secure semi-trailing arm (2) to transmission jack
5	Loosen link rod (6) of height sensor on one side	With code LG0 Bi-xenon headlamps or code LG1 Bi-xenon headlamps with cornering illumination
6	Unhook brake cable (5) on the cable adjuster		AR42.20-D-0520-03H
7	Disconnect connector of line (7) on subframe
8	Loosen cable tie from line (7) and brake cable (5)
9	Unscrew bracket (4) from rear axle differential
10	Unscrew nut (10)		*BA35.30-N-1002-01H
11	Remove bolts (1, 3)	 Have another person support the semi-trailing arm (2) at the front.
			*BA35.15-N-1001-01B
12	Remove semi-trailing arm (2)	 To do this, pull semi-trailing arm (2) off rear axle shaft (9).
13	Install in the reverse order

 Rear axle brake caliper

Number	Designation				Model 906


BA42.10-N-1008-12A	Bolt, brake caliper support to semi-trailing arm	M141.5	Stage 1	Nm	80
			Stage 2	°	30

 Rear axle shaft

Number	Designation			Rear axle 741.417 in model 906


BA35.30-N-1002-01H	Combination nut to rear axle shaft	M261.5	Nm	220

 Semi-trailing arm

Number	Designation				Rear axle 741.417


BA35.15-N-1001-01B	Bolt/nut, semi-trailing arm to subframe	M141.5	Stage 1	Nm	160
			Stage 2	°	120