Remove/install boots on front axle shaft

AR33.30-P-0690AL

13.3.12

MODEL 169.0 /3, 245.2 with TRANSMISSION 711.6, 716.5
inner boot

MODEL 169.090
Inner boot

Remove/install boots on front axle shaft

P33.30-2108-06

Shown on left front axle shaft

1 Shaft

2 Retaining ring

3 Boot

4 Clamp

5 Clamp

6 Ball retainer

7 Internal spider

8 Joint hub

X Dimension (4-5 mm)

P33.30-2106-01

Left front axle shaft

3 Boot

a Assembly dimension

P33.30-2107-01

Right front axle shaft

3 Boot

a Assembly dimension

Modification notes

9.3.12

Special tool added

Operation step 20

	Removing
1	Remove front axle shaft	Left front axle shaft
		Model 169, 245 except 169.090	AR33.30-P-0620AK
		Model 169.090	AR33.30-P-0620AKL
		Right front axle shaft
		Model 169, 245 except 169.090	AR33.30-P-0620AL
		Model 169.090	AR33.30-P-0620AKR
2	Clamp front axle shaft into vise	 Use protective jaws.
3	Detach hose clamp (4, 5)
4	Cut open boot (3) and detach.
5	Mark joint hub (8), ball retainer (6) and inner spider (7) in relation to each other
6	Detach joint hub (8)
7	Remove balls from ball retainer (6)
8	Detach inner spider (7) from shaft (1) using suitable drift
9	Detach ball retainer (6) from inner spider (7)
10	Remove circlip (2).
11	Check joint hub (8), ball retainer (6), inner spider (7) and balls for signs of wear	 Replace front axle shaft if damaged.	AR33.30-P-0660-03AK
	Install
12	Install circlip (2).	 Install new retaining ring (2).
13	Push hose clamp (4) onto the shaft (1)
14	Push boot (3) onto the shaft (1)
15	Insert inner spider (7) into ball retainer (6)
16	Push inner spider (7) onto the shaft (1)
17	Insert balls into ball retainer (6) and grease	 Use grease from the repair kit.
18	Push joint hub (8) onto the shaft (1)	 Observe installation position.
19	Fill boot (3) and joint hub (8) with remaining grease	 Use grease from the repair kit.
20	Push boot (3) onto joint hub (8), align and fix with hose clamps (4, 5)	 When aligning the boot (3) pay attention to assembly dimension (a).
		Ensure that the hose clamps (4, 5) are seated properly. Press together hose clamps (4, 5) to size (X) of 4 to 5 mm.
			*BE33.30-P-1002-04A
			*BE33.30-P-1003-04A
			*470589013700
21	Release front axle shaft from vise
22	Install front axle shaft	Left front axle shaft
		Model 169, 245 except 169.090	AR33.30-P-0620AK
		Model 169.090	AR33.30-P-0620AKL
		Right front axle shaft
		Model 169, 245 except 169.090	AR33.30-P-0620AL
		Model 169.090	AR33.30-P-0620AKR

Axle shaft boot assembly dimension

Number	Designation			Model 169.006/031/ 032/033/306/ 331/332/333 with code 426	Model 169.007/008/ 034/307/308/ 334 without code 426


BE33.30-P-1002-04A	Left inner boot (transmission side)	Assembly dimension	mm	173	170
BE33.30-P-1003-04A	Right inner boot (transmission side)	Assembly dimension	mm	176	173

Axle shaft boot assembly dimension

Number	Designation			Model 169.090


BE33.30-P-1002-04A	Left inner boot (transmission side)	Assembly dimension	mm	170
BE33.30-P-1003-04A	Right inner boot (transmission side)	Assembly dimension	mm	138

Axle shaft boot assembly dimension

Number	Designation			Model 245.207/208/ 234 without code 426	Model 245.231/232/ 233 without code 426


BE33.30-P-1002-04A	Left inner boot (transmission side)	Assembly dimension	mm	170	173
BE33.30-P-1003-04A	Right inner boot (transmission side)	Assembly dimension	mm	173	176

Pliers

470 589 01 37 00

เอกสารที่อ้างถึง