ar3330p0458a
Remove/install drive pinion
ประเภท ar · หัวข้อ 33.30 · เวอร์ชัน 0107 · 2012-04-17
ใช้กับ: MODEL 460 MODEL 461 (except 461.331) MODEL 463 (except 463.270 /271) up to model year 2013 /facelift 2012
ไม่มีใน “th” แสดงเป็น อังกฤษ
ตำแหน่ง
กลุ่มฟังก์ชัน 2 Chassis › 33 Front axle › 33.30 Final drive, differential, drive shaft — ซีรีส์ 460 · ซีรีส์ 461 (รุ่น 210, 211, 212, 213, 217, 218, 219, 227, 229, 238, 239, 249, 266, 267, 302, 304, 305, 310, 311, 312, 313, 317, 318, 321, 322, 323, 324, 325, 326, 327, 328, 329, 330, 332, 333, 334, 335, 336, 337, 338, 339, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 365, 366, 367, 368, 370, 371, 390, 391, 392, 394, 401, 402, 403, 404, 405, 450, 451, 452, 454, 455, 456, 458, 459) · ซีรีส์ 463 (รุ่น 200, 202, 204, 206, 207, 208, 209, 210, 215, 218, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 254, 255, 260, 261, 272, 273, 274, 275, 276, 277, 280, 300, 303, 304, 306, 307, 308, 309, 315, 318, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 335, 336, 338, 340, 341, 342, 343, 346, 348, 349, 350)
EinPAS 17 Drivetrain/axle › 17.50 Front axle › 17.50.65 Front axle differential/axle through drive — ซีรีส์ 460 · ซีรีส์ 461 (รุ่น 210, 211, 212, 213, 217, 218, 219, 227, 229, 238, 239, 249, 266, 267, 302, 304, 305, 310, 311, 312, 313, 317, 318, 321, 322, 323, 324, 325, 326, 327, 328, 329, 330, 332, 333, 334, 335, 336, 337, 338, 339, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 365, 366, 367, 368, 370, 371, 390, 391, 392, 394, 401, 402, 403, 404, 405, 450, 451, 452, 454, 455, 456, 458, 459) · ซีรีส์ 463 (รุ่น 200, 202, 204, 206, 207, 208, 209, 210, 215, 218, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 254, 255, 260, 261, 272, 273, 274, 275, 276, 277, 280, 300, 303, 304, 306, 307, 308, 309, 315, 318, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 335, 336, 338, 340, 341, 342, 343, 346, 348, 349, 350)
AR33.30-P-0458A
| Remove/install drive pinion
| 3.4.12
|
MODEL 460
MODEL 461 (except 461.331)
MODEL 463 (except 463.270 /271) up to model year 2013
/facelift 2012
1 Differential assembly
2 Nut
3 Drive flange
4 Drive pinion
5 Tapered roller bearing
6 Radial sealing ring
7 Bearing outer race
8 Compressed ring
9 Shim
| Removing
|
|
|
1
| Remove differential assembly (1)
|
| AR33.30-P-0432A
|
2
| Remove radial sealing rings (6) on drive pinion (4)
|
| AR33.30-P-0530GJ
|
3
| Remove drive pinion (4)
| Screw on support bridge. If required, drill out bores for supporting bolts to approx. 11 to 12 mm dia. or rework as elongated hole.
|
|
|
|
|
| *601589026300
|
4
| Take out tapered roller bearing (5) and compression ring (8)
|
|
|
| Checking
|
|
|
5
| Clean parts, check and replace if necessary
| Disassemble drive pinion (4) if necessary.
Disassembly or assembly takes place analog to the rear axle method:
|
|
|
|
| Disassemble/assemble drive pinion
| AR35.30-P-0459F
|
|
|
|
| *BE33.30-P-1004-05A
|
| Installation
|
|
|
6
| Install drive pinion (4)
| Screw support bridge onto axle housing and fit spindle to drive pinion (4)
|
|
|
|
|
| *601589026300
|
7
| Insert compression ring (8)
| Always replace strain ring (8).
|
|
8
| Drive in tapered roller bearing (5) using suitable sleeve
|
|
|
9
| Install radial sealing rings (6) on drive pinion (4)
| Replace all gaskets.
| AR33.30-P-0530GJ
|
10
| Check friction torque of drive pinion (4)
|
| AR33.30-P-0458-02GG
|
|
|
|
| *BE33.30-P-1001-02A
|
|
|
|
| *000589109900
|
|
|
|
| *001589492100
|
|
|
|
| *460589013100
|
11
| Install differential assembly (1)
|
| AR33.30-P-0432A
|
12
| Check concentricity of drive flange (3) and adjust if necessary
|
| AR33.30-P-0086A
|
Number
| Designation
| Model 460, 461, 463
|
|
|
|
|
|
|
|
|
|
|
BE33.30-P-1001-02A
| Friction torque of bevel gear with gaskets
| Nm
| 2,5-3,0
|
Test and adjustment values for front axle drive
Number
| Designation
| Front axle 730.3
|
|
|
|
|
|
|
|
|
|
|
|
|
BE33.30-P-1004-05A
| Specified basic dimension for front axle housing
|
| Nm
| 66
|
เอกสารที่อ้างถึง
