Remove/install front stabilizer bar

AR32.35-S-2050E

Remove/install front stabilizer bar

15.02.2019

Model

447 with engine 651

except code ZG2 (Permanent all-wheel drive)

Model

447 with engine 654.9

except code ZG2 (Permanent all-wheel drive)

Model

447, 448 with engine 274

Shown with ENGINE 651

1

Stabilizer bar

2

Bolts

Shown with engine 651 with code MX0 (Blue Efficiency package)

4

Retaining frame

5

Bolts

Notes on repair work on suspension components

AH00.00-P-0100-01A

 

Remove/install

1

Remove right cover from jack support point.

MODEL 447 with MOTOR 651 with CODE MX0 (BlueEFFICIENCY package)

AR61.30-S-1001-04E

2

Remove lower engine compartment paneling.

AR61.20-S-1105E

3

Remove the underfloor paneling on the right.

Model 447 with motor 651 with code MX0 (BlueEFFICIENCY package)

AR61.30-S-1001-01E

4

Remove bolts (5) and remove retaining frame (4) from right underfloor paneling.

MODEL 447 with MOTOR 651 with CODE MX0 (BlueEFFICIENCY package)

5

Remove both torsion bar linkages from stabilizer bar (1).

AR32.35-S-3328E

 Do not completely remove the stabilizer bar torsion bar linkage (1).

6

Remove bolts (2) and remove stabilizer bar (1).

 Bolt, stabilizer bar to integral carrier

*BA32.35-N-1001-02K

7

Install in the reverse order

 Front axle torsion bar

Number

Designation

Model 447, 448

BA32.35-N-1001-02K

Bolt, stabilizer bar to integral carrier

Nm

60