AR30.35-W-1100BA | Remove/install foot throttle actuator | 23.11.10 |
ENGINES 900.9 in MODEL 375.1, 970, 972, 975, 976 with BODY 972.890
ENGINES 902.9 in MODEL 950, 952, 953, 954 with BODY 940.890
ENGINES 902.9 in MODELS 375.1, 970, 972, 974, 975, 976 with BODY 972.890
ENGINES 904.9 in MODEL 375.1 with BODY 375.850
ENGINES 904.9 in MODEL 958.0 with BODY 958.860 with CODE (XV0) Global cockpit
ENGINES 904.9 in MODEL 970, 972, 975, 976 with BODY 972.890
ENGINES 906.9 in MODEL 374.5 with BODY 374.860
ENGINES 906.9 in MODEL 375.3 with BODY 375.820
ENGINES 906.9 in MODEL 950, 952, 953, 954 with BODY 940.890
ENGINES 906.9 in MODEL 958.0 with BODY 958.860 with CODE (XV0) Global cockpit
ENGINES 906.9 in MODEL 958.2 with BODY 958.870 with CODE (XV0) Global cockpit
ENGINES 906.9 in MODEL 970, 972, 974, 975, 976 with BODY 972.890
ENGINES 924.9 in MODEL 958.0 with BODY 958.860 with CODE (XV0) Global cockpit
ENGINES 924.9 in MODEL 970, 972, 974, 975, 976 with BODY 972.890
ENGINES 925.9 in MODEL 970, 972, 974 with BODY 972.890
ENGINES 926.9 in MODEL 950, 952, 953, 954 with BODY 940.890
ENGINES 926.9 in MODEL 958.2 with BODY 958.870 with CODE (XV0) Global cockpit
ENGINES 926.9 in MODEL 958.0 with BODY 958.860
W30.35-1191-08
Shown on body 940.890
1 Cover
2 Footwell trim on driver-side
X13 Diagnostic socket
Foot throttle actuator shows new design
3 Electrical connector
4 Bolts
B1 Foot throttle actuator
Foot throttle actuator shows previous design
3 Electrical connector
4 Bolts
B1 Foot throttle actuator
Modification notes
| Remove/install | ||
1 | Switch off ignition | ||
2 | Remove paneling in driver side footwell (2) around the steering column | ||
3 | Remove paneling (1) | For previous version of foot throttle actuator (B1) only. | |
4 | Remove foot throttle actuator (B1) | | |
5.1 | Disconnect electrical connector (3) of the foot throttle actuator (B1) at the multipoint connector | Foot throttle actuator (B1), previous design | |
5.2 | Disconnect electrical connector (3) from foot throttle actuator (B1) | Foot throttle actuator (B1), new design | |
6 | Install in the reverse order | ||
7 | Teach in foot throttle actuator (B1) using STAR DIAGNOSIS | Only when replacing previous version of foot throttle actuator (B1). | |
8 | Read out fault memory in the drive control, control unit with STAR DIAGNOSIS and delete faults if necessary |
Accelerator pedal