AR29.10-W-0080A | Adjust brake pedal | 24.8.07 |
MODEL 374, 375.1, 957, 958
MODEL 375.3 /4, 940, 942, 943, 944, 950, 952, 953, 954 except CODE (ZX2) EPB II
MODEL 970, 972, 974, 975, 976 except CODE (ZX2) EPB II
W29.10-1032-12
Shown on model 944 with body 944.890
1 Entrance paneling
2 Left lower footwell cover
3 Left upper footwell cover
4 Jam nut
5 Piston rod
Adjust | |||
1 | Check brake pedal for ease of movement | ||
2 | Remove door sill trim (1), left lower footwell cover (2) and left upper footwell cover (3) | Not on model 957. | |
Models 950, 952, 953, 954 with BODY 942.899 | |||
Model 375 with body 375.810/830/840, | |||
Model 374.5 with body 374.860, Model 374.6 with body 374.870, | |||
3 | Slacken lock nut (4) | ||
4 | Adjust piston rod (5) | Unscrew piston rod (5) until it touches piston, then screw back in to clevis approx. 1/2 turn. This setting corresponds to play of approx. 0.5 mm. | |
5 | Secure adjusted position of piston rod (5) with jam nut (4) | ||
6 | Install door sill trim (1), left lower footwell cover (2) and left upper footwell cover (3) | Not on model 957. | |
Models 950, 952, 953, 954 with BODY 942.899 | |||
Model 375 with body 375.810/830/840, | |||
Model 374.5 with body 374.860, Model 374.6 with body 374.870, |