AR27.60-L-0125VA | Remove/install automatic transmission range selector cable | 10.11.11 |
TRANSMISSION 722.750 /751 in MODEL 414.700
L27.60-0029-09
1 Range selector cable
2 Seal boot
3 Bracket
4 Range selector lever
9 Screw
10 Strut
11 Hose
5 Securing clamp
6 Floor-mounted shift
7 Screw
8 Screw
P27.60-0448-02
Position of range selector lever
4 Range selector lever
P Park position
R Reverse gear
N Neutral
D Drive position
| Remove/install | ||
1 | Remove floor selector | ||
2 | Remove front center console | ||
3 | Unscrew bolts (8, 9) | ||
4 | Detach cable tie (arrow) from hose (11) and pull hose (11) off air conditioner housing | Only vehicles with air conditioning (code H06). Installation: Replace cable tie. | |
5 | Pull seal boot (2) out of firewall | Installation: Ensure that seal boot (2) is seated correctly. | |
6 | Attach removal fixture for front axle carrier on front axle carrier | Lifter mounting adapter | |
7 | Remove bolts on both sides | Installation: First fit all the bolts, then tighten them fully. | |
| |||
8 | Lower engine with front axle carrier | Engine 166.961/991 | |
Engine 668.914 | |||
Carefully lower the front axle carrier with the engine up to a maximum of When lowering check for unobstructed movement of coolant hoses, air-conditioning hoses and electric cables, in order to avoid causing any damage. Installation: Guides at the front axle carrier must be inserted into the holes in the longitudinal member. Pay attention to guides at radiator | |||
9 | Detach front axle carrier removal device from front axle carrier | ||
10 | Move range selector lever (4) to position "P" | ||
11 | Unclip range selector cable (1) from range selector lever (4) | Installation: Grease ball joint lightly. | |
12 | Lower the lifting platform | ||
13 | Unscrew bolt (7) and remove range selector cable bracket (3) towards the front | | |
14 | Lift strut (10) using assembly lever and remove range selector cable (1) towards the passenger compartment | Pass bracket (3) with range selector cable (1) through the opening in the firewall (with an assistant). | |
15 | Install in the reverse order | ||
16 | Read out fault memory | ||
| Connect STAR DIAGNOSIS and read out fault memory | ||
STAR DIAGNOSIS diagnosis system |
Complete automatic transmission
Number | Designation | Transmission 722.750/751 | |
BA27.10-P-1002-04B | Bolt, range selector cable bracket to transmission | Nm | 8 |
Front axle carrier
Number | Designation | Model | ||
BA33.10-P-1001-01B | Bolt, front-axle carrier to body | M 12 | Nm | 110 |
BA33.10-P-1003-01B | Strut bolt on front-axle carrier | M 10 | Nm | 50 |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-06A | Long-life grease | A 000 989 63 51 11 |