S27.55-A004-79
1 | Automatic transmission fluid cooler | 3 | Left air duct segment | 5 | Screw | ||
2 | Oil lines | 4 | Holder | 6 | Electrical connector |
Caution | Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Notes on automatic transmission | |||
| Remove/install | ||
1 | Remove front bumper. | ||
Installation: Only install front bumper after leak test. | |||
2 | Disconnect electrical connector (6) from outside temperature sensor. | ||
3 | Remove left air duct segment (3). | To do so, unclip left air duct segment (3) at catch hooks. | |
4 | Remove bracket (4). | Remove screw (5) to do this. | |
5 | Disconnect oil lines (2) from automatic transmission oil cooler (1). | ||
Collect escaping automatic transmission fluid in suitable container to determine quantity of automatic transmission fluid. | |||
Assembly cleaner | |||
Record plug | |||
6 | Remove automatic transmission oil cooler (1). | To do so, unclip automatic transmission oil cooler (1) from holder. | |
7 | Install in the reverse order. | ||
8 | Fill automatic transmission with automatic transmission fluid. | ||
Only install engine compartment paneling after leak tightness test. | |||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
9 | Perform engine test run and check automatic transmission oil cooler (1) and oil lines (2) for leak tightness. | Visual inspection only. |
129 589 00 91 00
Record plug