P27.55-2111-09
1r | Oil cooling line (return) | 2z | Oil cooling line (feed) | 6 | Transmission | ||
1z | Oil cooling line (feed) | 3 | Banjo bolts | 8 | Front separation point | ||
2 | Double clamp | 4 | Retaining clamps | ||||
2r | Oil cooling line (return) | 5 | Radiator |
| Remove/install | ||
Danger ! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by vehicle manufacturer. | |
1 | Remove lower engine compartment paneling or bottom sections of soundproofing | Vehicles with diesel engine | |
Vehicles with gasoline engine | |||
Oil cooling line (feed) (1z) or oil cooling line (return) (1r) | |||
2 | Detach double clamp (2) | ||
3 | Disconnect oil cooling lines (1r, 1z) at front separating point (8) | ||
| |||
| |||
Collect transmission oil which runs out with a suitable container and seal line connections with stop plugs. | |||
Record plug | |||
4 | Detach retaining clamps (4) | Bolt, oil cooling line double clamp to bracket | |
Bolt, oil cooling line double clamp to engine oil pan | |||
Bolt, dual clamp to oil line | |||
5 | Remove banjo bolts (3) and pull oil cooling lines (1r, 1z) out of transmission (6) | | |
Collect transmission oil which runs out with a suitable container and seal line connections with stop plugs. | |||
Installation: Replace O-rings. | |||
Banjo bolt or union nut, oil cooler line to torque converter and transmission housing | |||
Record plug | |||
6 | Remove oil cooling lines (1r, 1z) to rear | ||
7 | Install in the reverse order | ||
Oil cooling line (feed) (2z) or oil cooling line (return) (2r) | |||
8 | Detach oil cooling lines (2r, 2z) from front connecting points (8) and pull out | ||
Collect automatic transmission fluid which escapes and seal line connections with stop plugs. | |||
Record plug | |||
9 | Detach double clamp (2) | Bolt, dual clamp to oil line | |
10 | Detach oil cooling lines (2r, 2z) from cooler (5) | Collect automatic transmission fluid which escapes and seal line connections with stop plugs. | |
Union nut connecting transmission oil line to cooler | |||
Record plug | |||
11 | Remove oil cooling lines (2r, 2z) downwards | | |
12 | Install in the reverse order | ||
| Check | ||
13 | Check oil level in transmission (6) and correct if necessary | ||
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
14 | Carry out engine test run; during test run, check that transmission (6) is functioning correctly and does not leak oil |
129 589 00 91 00
Record plug