Removing/installing drive shaft with K2, front planet carrier, internal plate carrier with K1 and B3

AR27.50-P-0612W

04.03.2020

Transmission

722.9, 724.2

Modification notes

27.02.2020

Operation step newly added.

Operation step 8

P27.00-A021-09

Shown on TRANSMISSION 722.9

1a	Torlon ring		13	Inner plate carrier		16	B1 multidisk brake
11	Drive shaft		15	B3 multidisk brake		17	Torlon rings

 Caution	Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil	Wear protective gloves, protective clothing and safety glasses. Do not pour transmission oil into beverage bottles.	AS00.40-Z-0001-01A
Topical note	Notes on avoiding damage through contamination and foreign objects		AH00.00-P-5000-01A
	Notes on automatic transmission		AH27.19-P-0001-01NKB
 	Remove/install
1	Remove output unit.		AR27.50-P-0611W
		 The output unit consists of the multidisk clutch K3, rear hollow shaft, rear planet carrier, output shaft and rear ring gear.
2	Remove drive shaft (11).
3	Remove Torlon rings (1a) from drive shaft (11).	 Installation: Replace the Torlon rings (1a).
		 Sleeve	*722589011400
4	Remove cylinder flange together with front planet carrier (12).
5	Remove inner plate carrier (13).
6	Remove multidisk brake B3 (15).		AR27.50-P-0890W
		 Installation: Position bores of multidisk brake B3 (15) and multidisk brake B1 (16) exactly on top of each other (arrows).
7	Remove multiplate clutch K1 (14).		AR27.51-P-0800W
8	Check Torlon rings (17) for damage.	If there is a problem,
		
		Replace Torlon rings (17).
		 Sleeve	*722589011400
9	Apply oil to transmission components before installation.
	Automatic transmission fluids (ATF) (specification 236.15)		BB00.40-P-0236-15A
		 Apply oil to transmission components before installation. Otherwise damage can occur during the startup phase when the transmission is being put into service.
10	Install in the reverse order.

722 589 01 14 00

Sleeve