1 | Planetary gear system 2 |
2 | Sun gear |
3 | K38 multiplate clutch |
P27.50-2202-12
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Caution | Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. | |
Notes on automatic transmission | |||
| Remove/install | ||
1 | Remove multiplate clutch K27 with output shaft and parking lock gear. | ||
2 | Remove planetary gear set 4 and planetary gear set 3 with ring gear. | ||
3 | Remove planetary gear set 2 (1) and sun gear (2) with multiplate clutch K38 (3) then disassemble. | Disassemble/assemble planetary gear set 2 | |
Disassemble/assemble multidisk clutch K38 | |||
Pressing tool | |||
Pliers | |||
4 | Install in the reverse order | ||
| Measure | ||
5 | Measure clearance of multiplate clutch K38 (3) and adjust, if necessary. | ||
Clearance in multidisk clutch K38 | |||
Pressure cylinder | |||
Set of drifts | |||
Pressing tool | |||
Parallel support | |||
6 | Measure end play of transmission and adjust, if necessary. | ||
Device | |||
Drift | |||
Parallel support | |||
7 | Measure end play of drive shaft and adjust, if necessary. | ||
Device | |||
Parallel support |
208 589 00 21 00
Pressing tool
722 589 06 15 00
Drift
722 589 01 31 00
Pressing tool
000 589 52 37 00
Pliers
722 589 04 15 00
Set of drifts
725 589 00 31 00
Device
725 589 03 31 00
Pressure cylinder
168 589 03 21 00
Parallel support