1 | Ring gear |
2 | Positioning disk |
3 | Thrust bearing |
4 | Thrust bearing |
6 | Planetary gear set 3 |
7 | Ring gear |
P27.50-2198-12
P27.50-2199-08
5 | Planetary gear set 4 | 7 | Ring gear | |
6 | Planetary gear set 3 |
Caution | Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Notes on automatic transmission | |||
| Remove/install | ||
1 | Remove multiplate clutch K27 with output shaft and parking lock gear. | ||
2 | Remove ring gear (1). | ||
3 | Unclip positioning disk (2) and axial bearings (3, 4) from ring gear (1). | ||
4 | Check ring gear (1), positioning disk (2) and axial bearings (3, 4) for damage. | If ring gear (1), positioning disk (2) or axial bearings (3, 4) are damaged, | |
| |||
replace damaged assembly part. | |||
5 | Remove planetary gear set 4 (5) and check for damage. | If planetary gear set 4 (5) is damaged, | |
| |||
disassemble or replace planetary gear set 4 (5). | |||
6 | Remove planetary gear set 3 (6) with ring gear (7) and check for damage. | If planetary gear set 3 (6) is damaged, | |
| |||
disassemble or replace planetary gear set 3 (6). | |||
7 | Install in the reverse order | ||
| Measure | ||
8 | Measure end play of drive shaft and adjust, if necessary. | ||
Device | |||
Parallel support | |||
9 | Measure end play of transmission and adjust, if necessary. | ||
Device | |||
Drift | |||
Parallel support |
722 589 06 15 00
Drift
725 589 00 31 00
Device
168 589 03 21 00
Parallel support