ar2740s070002e
Remove/install heat shield on transmission
ประเภท ar · หัวข้อ 27.40 · เวอร์ชัน 0101 · 2020-07-20
ใช้กับ: Transmission 725.0 in model 447, 448
ไม่มีใน “th” แสดงเป็น อังกฤษ
ตำแหน่ง
กลุ่มฟังก์ชัน 2 Chassis › 27 Automatic transmission › 27.40 Housing — ซีรีส์ 447 · ซีรีส์ 448
EinPAS 35 Body/frame/detachable parts › 35.25 Insulation/trim below/sealing/underbody protection › 35.25.40 Dampening/shielding/insulation mat — ซีรีส์ 447 · ซีรีส์ 448
ใช้กับเครื่องยนต์/เกียร์ด้วย: 725 0**
AR27.40-S-0700-02E
| Remove/install heat shield on transmission
|
|
|
Caution
| Risk of injury caused by scraping or cutting body parts on sharp vehicle parts
| Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.
| AS00.00-Z-0017-01A
|
Transmission
| 725.0 in model 447, 448
|
Automatic transmission complete
|
Number
| Designation
|
| Transmission 725.0 in model 447
|
BA27.10-N-1008-06EA
| Bolt, leaf spring for heat shield to transmission housing
| Nm
| 5
|
Automatic transmission complete
|
Number
| Designation
|
| Transmission 725.0 in model 447
|
BA27.10-N-1009-06EA
| Bolt, heat shield to oil pan
| Nm
| 9
|
Remove
1
| Unclip electrical wiring harness (2) from heat shield (1) (arrow).
|
2
| Remove screw (3) and remove heat shield (1) downward.
|
3
| Remove screw (4) and remove leaf spring (5).
|
|
| If the automatic transmission is replaced.
|
Install
4
| Attach leaf spring (5) to automatic transmission.
|
|
| If the automatic transmission has been replaced.
|
5
| Screw in and tighten screw (4) .
|
|
| If the automatic transmission has been replaced.
|
6
| Slide heat shield (1) under leaf spring (5).
|
7
| Screw in and tighten screw (3) .
|
8
| Attach electrical wiring harness (2) to heat shield (1) (arrow).
|
เอกสารที่อ้างถึง
