Remove/install shift shaft radial shaft sealing ring

AR27.40-S-0220S

21.4.09

TRANSMISSION 722.6 in MODEL 636, 639.601 /603 /605 /701 /703 /705 /711 /713 /811 /813 /815

N27.40-2016-06

4 Radial shaft seal

5  Internal extractor

	Remove
 Danger!	Risk of injury to skin and eyes caused by handling hot or glowing objects.	Wear safety gloves, protective clothing and safety glasses, if necessary.	AS00.00-Z-0002-01A
 Danger!	Risk of death cased by vehicle slipping or toppling off of the lifting platform.	Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
1	Remove selector lever rod on automatic transmission		AR27.60-S-6800S
2	Detach radial shaft sealing ring (4) using internal extractor (5)	 Internal extractor	*000589253300
	Install
3	Mount radial shaft sealing ring (4)	 Position new radial shaft sealing ring (4) and drive in carefully using a suitable drift.
4	Install selector lever rod on automatic transmission		AR27.60-S-6800S
	Check
 Danger!	Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns when working in engine during starting procedure	Secure vehicle to prevent it from moving. Wear closed and snug-fitting work clothes. Do not grasp hot or rotating parts.	AS00.00-Z-0005-01A
5	Run engine and inspect for leaks	 Carry out a visual inspection only.

Internal extractor

000 589 25 33 00