Removing and installing detent plate

AR27.35-P-0370A

2.9.09

TRANSMISSION 722.330 /331 /332 /337 /372 /375 /376 /380

N27.35-0256-06

1 Plastic guide

2 Roller

3 Detent plate with linkage

4 Washer

5 Bolt

6 Rotary shaft seal

7 Range selector shaft

	Removing, installing
1	Dismantle and assemble transmission (Section 1)	 Up to and including work step 4	AR27.50-P-0600B
2	Remove rear transmission cover	In models 901, 902, 903, 904	AR27.30-P-0680B
		In models 461, 463	AR27.30-P-0680G
3	Remove plastic guide (1) and remove roller (2) from linkage of detent plate (3)
4	Unscrew bolt (5) and remove range selector shaft (7)		*BA27.50-P-1002-01A
5	Remove rotary shaft seal (6)	 Installation: Check radial seal ring (6)
6	Remove detent plate with linkage
		 Installation: Unhook connecting linkage and adjust play	AR27.35-P-0360-02B
7	Install in reverse order

 Crown wheel/pinion

Number	Designation		Trans-missions 722.3/4/50


BA27.50-P-1002-01A	Bolt, detent plate to transmission housing	Nm	8