Removal and installation of bottom cover with intermediate plate

AR27.35-P-0360A

7.9.94

TRANSMISSION 722.5

P27.30-0200-06

8 Screw

13 Bottom cover

135 Fixing pin

140 Hexagon bolt

142 Locking spring

151 Adjusting ring and locking washer

152 Locking lever

	Removal, installation
1	Remove shift valve housing		AR27.35-P-0320A
2	Turn adjusting ring and locking washer (15) clockwise using a screwdriver and unhook connecting linkage	Installation: Swivel locking lever (152) below the locking plate.
		Installation: Hook up connecting linkage and adjust play.	AR27.35-P-0360-02A
3	Remove locking spring (142) and fixing pin (135)	 By unscrewing Hexagon bolts (140)
			*BA27.35-P-1002-02A
4	Unscrew electrical cables at kick-down solenoid valve (Y3/1y1) and at control valve for 5th gear (Y3/1y2)		AR27.50-P-0360-03A
5	Detach bottom cover with intermediate plate and oil tube complete from transmission	 By unscrewing Hexagon bolts (8)
		  According to findings 	*BA27.35-P-1001-02A
		Detach bottom cover (13) from large intermediate plate	AR27.35-P-0380A
	Feed B1 enlarged	Transmission 722.5	BT27.40-P-0001-01A
6	Remove control valve for 5th gear		AR27.35-P-0360-01A
7	Install in reverse sequence

Test values of bottom cover

Number	Designation		Transmission 722.5


BE27.35-P-1001-01A	Play between shift lock-out stop and locking plate	mm	0–0.05

 Bottom cover

Number	Designation		Transmissions 722.3/5	Transmission 722.4


BA27.35-P-1001-02A	Bolt, bottom cover to transmission housing	Nm	8	8
BA27.35-P-1002-02A	Bolt, detent spring to bottom cover	Nm	8	–