Remove/install valve body assembly

AR27.35-P-0320A

15.8.11

TRANSMISSION 722.5

P27.40-0228-06

3 Oil pan

3a Seal

4 Hexagon bolt

4a Oil drain plug

5 Oil filter

7 Hexagon bolt

A Shift valve housing

A1 Range selector lever

	Remove/Install
1	Move selector lever to position "P"
2	Unscrew oil drain plug (4a) and drain transmission oil	 Observe local disposal regulations!
			*BA27.10-P-1001-03A
3	Remove oil pan (3) and gasket (3a)	 For this purpose, unscrew hexagon bolts (4)
			*BA27.10-P-1002-03A
4	Remove oil filter (5)	 For this purpose, unscrew cross-head screws
5	Remove shift valve housing (A)	 For this purpose, unscrew hexagon bolts (7)
		 According to condition:
		Disassembling and assembling shift valve housing	AR27.35-P-0340A
		 Installation: Three hexagon bolts are 50mm long, all the others are 55 mm long Ensure that the range selector lever (A1) engages in the driver (arrow)	AR27.35-P-0340A
			*BA27.35-P-1001-01A
	Feed B1 enlarged	Transmission 722.5	BT27.40-P-0001-01A
6	Install in the reverse order
7	Check oil level in automatic transmission and correct if necessary		AR27.00-P-0100A

 Automatic transmission oil pan

Number	Designation		Trans-mission 722.4/5/7


BA27.10-P-1001-03A	Oil drain plug on oil pan	NM	22
BA27.10-P-1002-03A	Bolt, oil pan to transmission housing	NM	8

 Shift valve housing

Number	Designation		Transmission 722.3/4/5


BA27.35-P-1001-01A	Bolt, shift valve housing to transmission housing	NM	8