Removing and installing the inductive transmitter (turbine n.d.r.)

AR27.19-S-0900A

Removing and installing the inductive transmitter (turbine n.d.r.)

29.11.95

 

Removing, installing



Pay attention to meticulous cleanliness, only use fluff-free cloths

Risk of damage due to contaminants in transmission.



Notes on battery

AH54.10-P-0001-01A

1

Disconnect ground cable from battery

 Refer to "Removing and installing battery".

 Installation: -Code the radio.
-Set the clock.

AR54.10-S-0005A

2

Remove automatic transmission oil pan

AR27.10-S-7030A

3

Unscrew Torx bolt (1)

 Ensure that the Torx bolt (1) does not fall into the transmission.



*BA27.19-N-1002-02A



*WH58.30-Z-1042-06A

4

Remove inductive sensor (B92) and disconnect inductive sensor connector (B92.1)

 Lift up lug (arrow) with a screwdriver until the inductive sensor connector (B92.1) can be disconnected.

 Installation: The lug (arrow) must lock safely in position in the journal of the inductive sensor (B92).

5

Install in reverse order

Number

Designation

Model 638 with engine 111, 601.970, 611.980

BA27.19-N-1002-02A

Inductive transmitter (turbine n.d.r.) in the transmission

Nm

8

Number

Designation

WH58.30-Z-1042-06A

TORX socket wrench Tx27, 1/2"