Removing and installing the inductive transmitter (turbine n.d.r.) · ar2719s0900a · Mercedes-Benz WIS

AR27.19-S-0900A

Removing and installing the inductive transmitter (turbine n.d.r.)

29.11.95

ENGINE 601.970, 111, 611.980 in MODEL 638
Transmission installed

S27.19-2008-11

1 Torx screw

B92 Inductive transmitter

B92.1 Inductive transmitter plug-in connection

 	Removing, installing
	Pay attention to meticulous cleanliness, only use fluff-free cloths	Risk of damage due to contaminants in transmission.
	Notes on battery		AH54.10-P-0001-01A
1	Disconnect ground cable from battery	 Refer to "Removing and installing battery".  Installation: -Code the radio. -Set the clock.	AR54.10-S-0005A
2	Remove automatic transmission oil pan		AR27.10-S-7030A
3	Unscrew Torx bolt (1)	 Ensure that the Torx bolt (1) does not fall into the transmission.
			*BA27.19-N-1002-02A
			*WH58.30-Z-1042-06A
4	Remove inductive sensor (B92) and disconnect inductive sensor connector (B92.1)	 Lift up lug (arrow) with a screwdriver until the inductive sensor connector (B92.1) can be disconnected.  Installation: The lug (arrow) must lock safely in position in the journal of the inductive sensor (B92).
5	Install in reverse order

 Electricity, transmission

Number	Designation		Model 638 with engine 111, 601.970, 611.980


BA27.19-N-1002-02A	Inductive transmitter (turbine n.d.r.) in the transmission	Nm	8

Commercially available tools

Number	Designation
WH58.30-Z-1042-06A	TORX socket wrench Tx27, 1/2"