AR27.19-S-0600A | Removing and installing the pressure sensor | 29.11.95 |
ENGINE 111.948 /978, 601.970 in MODEL 638 with CODE (G40) Automatic transmission
S27.19-2010-06
1 Support
2 Hose connection
3 Nuts
4 Combined screw
B70 Pressure sensor
B70.1 Pressure sensor plug-in connection
| Removing and installing | ||
1 | Disconnect the ignition | ||
2 | Disconnect the plug-in connection (B70.1) | Installation: Plug the connector into the pressure sensor (B70) until the safety protector can be heard to click in. | |
3 | Remove the hose connection (2) | Open the hose bracket to do this | |
4 | Unscrew the nuts (3) and lean the support (1) forwards with the pressure sensor (B70) until the combined screw (4) can be reached | The cable brackets of other cable harnesses are not cut. | |
5 | Unscrew the combined screw (4) and take the pressure sensor (B70) out of its support (1) | ||
6 | Installation in reverse order |