ar2719s0600a

Removing and installing the pressure sensor

Type ar · topic 27.19 · version 0102 · 1999-05-31

Applies to: ENGINE 111.948 /978, 601.970 in MODEL 638 with CODE (G40) Automatic transmission

Where it sits

Function group 2 Chassis › 27 Automatic transmission › 27.19 Transmission - electrical system — Series 601 (models 970) · Series 638

EinPAS 17 Drivetrain/axle › 17.20 Transmission › 17.20.12 Sensor/switch/wiring harness — Series 601 (models 970) · Series 638

Also applies to engines/gearboxes: 111 948, 111 978

AR27.19-S-0600A

Removing and installing the pressure sensor

29.11.95

ENGINE 111.948 /978, 601.970 in MODEL 638 with CODE (G40) Automatic transmission

Removing and installing the pressure sensor

S27.19-2010-06

1 Support

2 Hose connection

3 Nuts

4 Combined screw

B70 Pressure sensor

B70.1 Pressure sensor plug-in connection

Removing and installing

1

Disconnect the ignition

2

Disconnect the plug-in connection (B70.1)

Installation: Plug the connector into the pressure sensor (B70) until the safety protector can be heard to click in.

3

Remove the hose connection (2)

Open the hose bracket to do this

4

Unscrew the nuts (3) and lean the support (1) forwards with the pressure sensor (B70) until the combined screw (4) can be reached

The cable brackets of other cable harnesses are not cut.

5

Unscrew the combined screw (4) and take the pressure sensor (B70) out of its support (1)

6

Installation in reverse order