1 | Screw |
2 | Screw |
3 | Screw |
4 | Screw |
5 | Screw |
6 | Screw |
7 | Screw |
8 | Screw |
9 | Screw |
10 | Screw |
30 | Quick-release coupling |
34 | Oil pan |
35 | Transmission housing |
P27.00-2406-06
Pos. 4 | Position 4 |
P27.00-2450-11
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Caution | Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Notes on threaded connections fastened using a tightening angle-based tightening process | ||
Notes on automatic transmission | |||
| Remove/install | ||
1 | Raise vehicle. | ||
Topical note | Special instructions for lifting and supporting vehicle | ||
2 | Thoroughly clean oil pan(34) and surrounding area. | Assembly cleaner | |
3 | Place suitable receptacle under transmission. | ||
4 | Open quick-release fastener (30) using socket wrench. | Installation: Replace sealing ring of quick-release fastener (30). | |
Socket wrench | |||
5 | Use socket wrench to turn overflow pipe to position 4 and drain off transmission oil. | Socket wrench | |
6 | Remove heat shield from transmission. | ||
7 | Remove bolts (1 to 10). | Installation: Replace bolts (1 to 10). | |
Screw/bolt, oil pan to transmission housing | |||
8 | Detach oil pan(34) from transmission housing(35). | Installation: The oil pan (34) must always be replaced. | |
9 | Clean sealing surface on transmission housing (35). | Installation: | |
Installation: Allow assembly cleaner to flash off completely. | |||
Assembly cleaner | |||
10 | Install in the reverse order. | ||
11 | Fill transmission with oil. | ||
| |||
| Check | ||
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
12 | Perform engine test run and check transmission for leak tightness and proper operation. |
724 589 01 09 00
Socket wrench
725 589 00 09 00
Socket wrench