Remove/install park pawl actuator

AR27.10-D-0007TSC

Remove/install park pawl actuator

18.07.2019

Transmission

725.0 in model 907

1

Park pawl actuator

3

Transmission housing

5

Pilot bushing

2

Bolts

4

Shift rod

 Caution

Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil

Wear protective gloves, protective clothing and safety glasses.
Do not pour transmission oil into beverage bottles.

AS00.40-Z-0001-01A

Topical note

Notes on threaded connections fastened using a tightening angle-based tightening process

AH00.00-P-0020-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Notes on automatic transmission

AH27.19-P-0001-01NKB

 

Remove/install

1

Remove fully integrated transmission control (VGS) electric controller unit (N15/11).

AR27.19-D-0200TSC

2

Remove bolts (2) and remove park pawl actuator (1) downwards from transmission housing (3).

 WIS Service Media
wsm://04_201900_01

 Installation: Replace screw/bolts (2).
Make sure that the shift rod (4) is seated correctly in the pilot bushing (5).

 Screw/bolt, park pawl actuator to transmission housing

*BA27.10-P-1015-04H

3

Install in the reverse order

 Automatic transmission complete

Number

Designation

Transmission 725.0

BA27.10-P-1015-04H

Screw/bolt, park pawl actuator to transmission housing

Stage 1

Nm

4

Stage 2

°

90