AR26.60-W-0012E | Sensor unit removal and installation | 8.11.05 |
TRANSMISSION 715.500 in MODEL 940, 942, 943, 950, 952, 953, 954 with CODE (GS2) Gear control
TRANSMISSION 715.510 in MODEL 940, 944, 950, 952, 953, 954 with CODE (GS2) Gear control
TRANSMISSION 715.513 in MODEL 950, 954 with CODE (GS2) Gear control
TRANSMISSION 715.520 in MODEL 940, 942, 943, 944, 950, 952, 953, 954 with CODE (GS2) Gear control
TRANSMISSION 715.540 in MODEL 950, 952, 954 with CODE (GS2) Gear control
W26.60-1228-05
Illustrated on model 940
1 Boot
2 Bolts
A15 Gear control (GS) shift control unit
X1 Plug connector
| Remove/install | ||
1 | Switch off ignition | ||
2 | Remove boot (1) from frame of gear control (GS) shift control unit (A15) | ||
3 | Unscrew bolt (2) | | |
4 | Pull out gear control shift control unit (A15) upwards and then forwards off the mounting console | ||
5 | Release connecting plug (X1) and disconnect from gear control shift control unit (A15) | ||
6 | Install in the reverse order | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the running engine | Secure vehicle to prevent it from moving by itself. | |
7 | Carry out function check | Check all gear control (GS) shift control unit (A15) functions. |
Shift mechanism