1 | Shift cables |
2 | Bracket |
3 | Relay lever |
4 | Relay lever |
5 | Bracket |
6 | Shift module |
7 | Carrier console |
T26.10-0014-01
T26.60-0037-01
| Remove/install | ||
1 | Park vehicle over pit | ||
2 | Put gearshift system in neutral | ||
3 | Expose maintenance flap of transmission and detach | See information from vehicle manufacturer. | |
4 | Detach shift cables (1) from bracket (2) and from relay levers (3, 4) | ||
5 | Remove engine compartment lining below transmission | See information from vehicle manufacturer. | |
6 | Detach shift cables (1) from shift module (6) and carrier console (7) | ||
| Notes on self-locking nuts and bolts | ||
7 | Detach cable ties for fastening shift cables (1) from frame | ||
8 | Detach brackets for fastening shift cables (1) from frame | ||
9 | Pull out shift cables (1) forwards | Helper required. | |
10 | Install in the reverse order | ||
| Check | ||
11 | Check for correct adjustment of shift cables (1) by shifting through all gears | If there are problems | |
| |||
Slacken the counternuts on the threaded adjustment rods, adjust the shift cables (1) by twisting the threaded adjustment rods until they are without play and tighten the counternuts. | |||
The gearshift system is in neutral. |