1 | Shift cables |
2 | Cover plate |
3 | Gearshift lever |
4 | Clamping piece |
6 | Shift module |
7 | Carrier console |
T26.60-0036-01
T26.60-0037-01
| Remove/install | ||
1 | Park vehicle over pit | ||
2 | Detach gearshift lever (3) from clamping piece (4) on shift module (6) and remove | ||
3 | Detach cover plate (2) from vehicle floor | ||
4 | Detach shift cables (1) from shift module (6) and carrier console (7) | ||
5 | Unscrew carrier console (7) with integrated shift module (6) from vehicle floor and remove downwards | Installation: Replace the spring lock washers. | |
6 | Install in the reverse order | ||
| Check | ||
7 | Check limit stops for shifting the gate by moving gearshift lever (3) to left and right | If necessary | |
| |||
Adjust limit stops. | |||
The two stop screws for adjusting the limit stops are located on the underside of the shift module (6). |