Transmission | 710.510 in model 906.133/135/153/155/631/633/635/655/657 |
with code ZL3 (National version for Latin America) | |
Transmission | 711.651 in model 906.1/2/6/7 with engine 646.984/985/986/989/990 |
Transmission | 711.660 in model 906.1/2/6/7 with engine 642.992, 646.985/986/989/990 |
Transmission | 711.680 in model 900 |
Transmission | 711.680 in model 906 |
Transmission | 711.685 in model 906 |
1 | Shift gate |
2 | Transmission |
3 | Shift cables |
4 | Boot |
D26.60-1188-11
| Remove | ||
1 | Remove glove box | ||
2 | Remove cover below steering wheel | ||
3 | Remove air vent coverings from instrument panel center section | ||
4 | Remove center footwell cover | ||
5 | Remove cover on gearshift lever | ||
6 | Remove shift gate (1) | ||
7 | Remove shift cables (3) on shift gate (1) | ||
8 | Detach boot (4) from cutout in body floor | ||
9 | Raise vehicle | ||
10 | Detach shift cables (3) from transmission (2) |
| |
Transmission 710.510 in model 906.133/135/153/155/631/633/635/655/657 | |||
11 | Pull out shift cables (3) through hole in body floor | | |
| Install | ||
12 | Guide shift cables (3) through hole in body floor | | |
13 | Attach shift cables (3) to transmission (2) |
| |
Transmission 711.651 in model 906.1/2/6/7 with engine 646.984/985/986/989/990 | |||
Long-life grease | |||
14 | Lower vehicle | ||
15 | Check boot (4) | If damage is present | |
| |||
Replace boot (4). | |||
16 | Install boot (4) in cutout in body floor | Ensure correct seating of the boot (4). | |
17 | Attach shift cables (3) to shift gate (1) | ||
Long-life grease | |||
18 | Attach shift gate (1) | ||
Screw, shift gate to instrument panel/mounting support | |||
19 | Install center footwell cover | ||
20 | Install air vent covers in instrument panel center section | ||
21 | Install cover below steering wheel | ||
22 | Install glove box | ||
Adjust | |||
23 | Adjust shift cables (3) |
| |
Transmission 710.510 in model 906.133/135/153/155/631/633/635/655/657 | |||
24 | Install cover by shift lever |