D26.50-1328-09
Shown on model 909 with transmission 711.683 |
1 | Retaining ring | 8 | Sliding sleeve | 15 | 5th gear idler gear | ||
2 | Constant-mesh gear | 9 | Thrust piece | 16 | 5th gear needle bearing | ||
3 | 3rd gear fixed gear | 10 | Synchronizer body | 17 | Countershaft | ||
4 | Spacer ring | 11 | Synchronizer ring | 18 | Roller bearing of intermediate plate | ||
5 | Needle bearing | 12 | Cone ring | 19 | Oil guide ring | ||
6 | Bearing sleeve | 13 | Friction ring | 20 | Oil slinger | ||
7 | Synchronizer ring | 14 | Shim |
D26.50-1283-09
Shown on model 909 with transmission 711.680 |
1 | Retaining ring | 11 | Synchronizer ring | |
2 | Constant-mesh gear | 12 | Cone ring | |
3 | 3rd gear fixed gear | 13 | Friction ring | |
4 | 6th gear idler gear | 14 | Shim | |
5 | 6th gear needle bearing | 15 | 5th gear idler gear | |
6 | Bearing sleeve | 16 | 5th gear needle bearing | |
7 | Synchronizer ring | 17 | Countershaft | |
8 | Sliding sleeve | 18 | Roller bearing of intermediate plate | |
9 | Thrust piece | 19 | Oil guide ring | |
10 | Synchronizer body |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Caution | Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. | |
| Remove | ||
1 | Remove transmission and secure to assembly stand. | ||
2 | Disassemble transmission housing. | ||
3 | Remove countershaft (17). | ||
| Disassemble | ||
4 | Disassemble countershaft (17). |
| |
Transmission 711.683 in model 909 | |||
Commercially available devices/tools | |||
Drift | |||
| Check | ||
5 | Clean component parts and check for damage and wear, replace if necessary. | Assembly cleaner | |
| Assemble | ||
6 | Assemble countershaft (17). |
| |
Transmission 711.683 in model 909 | |||
Commercially available devices/tools | |||
Sleeve | |||
Drift | |||
| Install | ||
7 | Install countershaft (17). | ||
8 | Assemble transmission housing. | ||
9 | Remove transmission from assembly stand and install. |
716 589 02 33 00
Sleeve
366 589 02 15 00
Drift
711 589 17 15 00
Drift