D26.50-1264-09
1 | Retaining ring | 7 | Friction ring | 13 | Cone ring | ||
2 | Constant-mesh gear | 8 | Cone ring | 14 | Friction ring | ||
3 | 6th gear drive gear | 9 | Synchronizer ring | 15 | Clutch body | ||
4 | 3rd gear idler gear | 10 | Retaining ring | 16 | 4th gear idler gear | ||
5 | 3rd gear needle roller bearing | 11 | 3rd/4th gear synchronizer unit | 17 | 4th gear needle roller bearing | ||
6 | Clutch body | 12 | Synchronizer ring | 18 | Countershaft |
| Remove | ||
1 | Remove the transmission | ||
2 | Attach transmission to assembly stand | ||
3 | Disassemble transmission housing | ||
4 | Remove countershaft (18) | ||
| Disassemble | ||
5 | Disassemble countershaft (18) | ||
| Clean | ||
6 | Clean the components | Use clean, lint-free rag. | |
| Check | ||
7 | Check components | If damaged or worn | |
| |||
Replace corresponding component. | |||
| Assemble | ||
8 | Assemble countershaft (18) | ||
Set of assembly clamps | |||
Drift | |||
| Install | ||
9 | Install countershaft (18) | ||
10 | Attach gear set with rear section of transmission housing to assembly stand | ||
11 | Assemble transmission housing | ||
12 | Detach transmission from assembly stand | ||
13 | Install transmission |
711 589 01 37 00
Set of assembly clamps
711 589 17 15 00
Drift